Masonry contractor in Boynton Beach, FL - repairs built for rainy summers

Quality Wellington Concrete and Masonry is a masonry contractor working in Boynton Beach, repairing cracked block, brick and joints and building walls, driveways and walkways for homes from the older east side to the newer communities west of I-95.

Get an estimate (561) 268-0510

Gray concrete block retaining walls frame a short stairway with broad stone treads.

Light gray square-tile walkway runs beside a blue swimming pool.

Boynton Beach homes as we see them on the job

Most of the houses we're called to in Boynton Beach are concrete block finished in stucco. They run from small ranch homes near downtown and the water to the planned communities farther west, with shops and condos mixed in along the main roads. We're based in Wellington, and the calls here sound a lot like the ones we get next door in Delray Beach: a crack across a garden wall, a paver driveway that's sunk in spots, or a block wall someone's been wanting for years.

The ground here is sandy and sits low, and summer rain can stand on it for days, so we plan footings, drainage and base work around water before we talk about looks.

The masonry work we do in Boynton Beach

Foundation repair
If a crack runs through your slab edge or block, foundation repair starts with finding out why it moved, usually water or settled fill, before we patch anything.
Explore service
Chimney repair
We do chimney repair on the brick and block chimneys some Boynton Beach homes still have, resetting loose brick and sealing the cap on top where rain gets in.
Explore service
Tuckpointing
Tuckpointing is grinding out tired mortar joints and refilling them with a crisp finished line, and we only do the joints that need it, not the whole wall.
Explore service
Brick repair
When a brick's face is flaking off or it's cracked through, brick repair means cutting out just that brick and setting a matched one in fresh mortar.
Explore service
Driveway pavers
Driveway pavers last when the packed base under them drains, so most of the plan is the dig and the base, not the pattern.
Explore service
Retaining wall construction
Want a raised bed or a drop in the yard held in place? Retaining wall construction turns on the height, the footing and the drainage behind the wall.
Explore service
Masonry restoration
Masonry restoration is for older brick or stone that's worn but sound, so we clean, repoint and repair what's failing and leave the rest.
Explore service
Fireplace installation
For an indoor or patio fireplace, fireplace installation is planned around the firebox, the chimney or vent route, and the footing that carries the weight.
Explore service
Stone veneer installation
Stone veneer installation puts thin stone over block or a framed wall, and the waterproof layer and drainage behind it matter more here than the stone you pick.
Explore service
Concrete block walls
Privacy and garden walls are usually concrete block walls, set on a poured footing with steel and concrete down the hollow cores, then stuccoed to match.
Explore service
Foundation block wall installation
Foundation block wall installation means laying the short block wall that raises a floor or addition, built to the drawings and inspected before framing goes on.
Explore service
Outdoor kitchen masonry
If you want a grill island on the patio, outdoor kitchen masonry covers the block base, counter support and finish, planned around where gas, water and power run.
Explore service
Walkway construction
Walkway construction in pavers, brick or concrete gets a slight slope away from the house so summer rain runs off instead of pooling at the door.
Explore service
Brick wall installation
Brick wall installation covers low garden walls up to tall screen walls, and we settle the footing, brick and cap with you at the estimate.
Explore service
Stone masonry
For natural stone steps, columns or wall faces, stone masonry is slower hand-fit work, so the stone type and how much cutting it needs shape the plan.
Explore service
Brick pointing
Brick pointing is filling worn mortar joints flush, and we match the mortar to the old brick, because mortar that's too hard can crack the brick around it.
Explore service

What to know before masonry work starts in Boynton Beach

Permits here come from the city's Building Department, which covers structural work, fences and driveways and handles the plan review and inspections, so a new wall or driveway waits on that review before we dig and on each inspection after. Before you hire anyone, you can check a contractor's state license with Florida's Department of Business and Professional Regulation, which requires certified contractors to pass a state exam first, and you can ask for the business tax receipt the city wants before any business starts work here. We're licensed and insured, and when your job calls for a permit, we apply for it, set up the inspections and go over it with you at the estimate. Price comes down to the size and height of the work, the materials you pick, how easily we can get block, pavers and equipment to the spot, and what we find once old work is open, and your own figure comes with the estimate I write on site.

Lots east of Federal Highway tend to be tighter, with older homes close together, so getting a pallet of pavers into a backyard can mean hand-carrying, while the newer communities out west usually leave room for equipment. We plan for that the same way we do in Greenacres and Boca Raton, and it's one reason access shows up in the price.

June, August and September are the wettest months in the nearest long-term weather records, kept in West Palm Beach, so summer footings, pours and pointing get scheduled around the afternoon storms.
Long hot months dry fresh mortar and concrete fast, so we keep new joints and pours damp and shaded while they cure instead of letting the sun bake them.
If your property is in the Special Flood Hazard Area, the city requires a permit for filling and grading too, which matters for retaining walls, raised beds and driveway base work.
When new construction or a rebuild worth half or more of the house's market value sits in the floodplain, the city wants the lowest floor at base flood elevation plus one foot, which sets how tall a foundation block wall runs.
Plenty of communities here have a homeowners' association, and its sign-off on wall height, paver color or stone usually has to come first, so we ask about it at the estimate.

Get a free on-site estimate for your Boynton Beach masonry

Tell us about the crack, wall or driveway you have in mind, and we'll reply within one business day to set a time. I come out to look at it myself, explain what's going on and write the estimate on site, free and with no pressure to book. If you'd rather talk it through first, call (561) 268-0510.

(561) 268-0510

Questions Boynton Beach homeowners ask about masonry work

Does a masonry job under $7,500 need a permit in Boynton Beach?

It still might, because the city's exemption for single-family work under $7,500, in effect since July 2026, comes with significant limits, and structural work, fences and driveways on a single-family house still need a permit whatever they cost. The exemption covers only a complete single project that isn't split to stay under the line, you or your contractor has to request it in writing, and any property partly or fully in a flood hazard area still needs a permit. The city lays it out on its permit exemption page, and we'll go over where your job falls at the estimate.

How do I find out if my Boynton Beach home is in a flood zone?

Call the city's Development Department at 561-742-6350, because it reviews the floodplain information on file to tell you where your property sits. It's worth asking even if you checked years ago, since Palm Beach County's updated FEMA maps took effect in December 2024 and added thousands more eastern-county residents to high-risk zones, and the county sends Boynton Beach residents to the city for the answer. If your job involves grading or a foundation, we'll ask about it at the estimate.

What business tax receipts should a masonry contractor have in Boynton Beach?

They should have the city's business tax receipt, which every business working inside city limits needs before it starts, and a Palm Beach County local business tax receipt, which anyone selling services in the county must hold. Ask to see both along with their state license, since together they show the contractor is set up to work on your house here.

Service areas

Boynton Beach is one of the cities we cover from our base in Wellington, and these are the others with their own page. If your city isn't listed, call and ask, because we work in plenty of cities around these too.

We're open until 10 PM on weekdays and 9 PM on weekends, so you can call (561) 268-0510 or use the estimate form once you're home and looking at the problem.